San-tron range of SMA RF and microwave coaxial connectors and phase-matched adapters, can be set for specific frequency ranges, from DC to 40, GHz depending upon the requirements.
They are available as male and female cable connectors in crimp or solder versions, with San-tron's unique, high reliability, torque-proof, safety-lock coupling nuts. SMA cable connectors also include eSeries configurations for ruggedized, flexible coaxial cable assemblies. They offer outstanding performance through 20 GHz
SMA receptacles are offered in bulkhead, press-fit, and panel-mount configurations. Panel-mount receptacles can be supplied in 3/8-1/2-inch square flange sizes as well as in 2-hole versions, with or without gasket seals. San-tron's SMA receptacles feature solder-cup, post, or tab contact terminations. Receptacles can be configured in pressure resistant, pSeries, construction.
A variety of high performance, field-replaceable, SMA connectors are available for use with 0.012-, 0.015-, 0.018-, and 0.020-inch diameter pin sizes. They feature 1/2-inch square, 3/8-inch square, and 2-hole flanges, and are available with or without EMI gaskets and ground planes.
San-tron also offers a wide variety of standard .020”, .015”, .012”, and .009” feed-through accessories, for use with our Field Replaceable connectors. We can also provide custom launch pins, PTFE insulators and glass to metal feedthroughs for your unique application.
San-torn also offers a select range of 3.5mm receptacles.
To select a SMA or 3.5mm connector, please visit our Product Finder.
Frequency Range: DC to 12.4 GHz, DC to 18 GHz, DC to 26 GHz, DC to 40 GHz
(Dependent upon cable)
Voltage Rating: 355 to 500 VRMS (sea level; dependent upon cable)
Nominal Impedance: 50 ohms
DWV: 500 to 1500 VRMS (sea level; dependent upon cable)
Insulation Resistance: 10,000 megaohms
Temperature Range: -65°C to +165°C
Ingress Protection (pSeries): IP68, MIL-STD 202 Method 212, Condition D
Dielectrics: PTFE
Contacts (Female): Beryllium Copper – Gold plating
Gaskets: Silicone Rubber
Locking Ring: Beryllium Copper
Crimp Sleeves: Copper, soft temper
Other Metal Parts: Brass or 303 Stainless Steel – Albaloy, Nickel, Silver plating or Passivated