San-tron’s new 2.4mm & 1.85mm Precision Adapters are mode free and deliver best-in class performance. The 2.4mm adapters provide typical performance of less than 1.20:1 VSWR through 50 GHz. The 1.85 mm adapters provide typical performance of less than 1.20:1 VSWR through 65 GHz.
The new 1.85mm field replaceable connectors are available in 3/8 and 1/2-inch square, 2-hole .550” flange and 2 hole .625” flange configurations for 0.009” launch pin diameters. Typical VSWR performance is below 1.15:1 to 50 GHz and 1.20:1 to 65 GHz.
San-tron’s new line of high performance, 2.4mm field replaceable connectors are mode free and deliver low VSWR performance through 50 GHz.
Typical VSWR performance is below 1.10:1 to 18 GHz, 1.15:1 to 40 GHz and 1.2:1 to 50 GHz.
San-tron’s TuffTestTM SMA, 2.92mm, 2.4mm and 1.85mm microwave/RF VNA test cables offer superior performance, durability, and value.
Tufftest VNA test cables feature a high-performance microwave cable, protected by a wound stainless steel armor casing and an abrasion resistant outer sheath. The resulting construction is highly flexible, crush and torque resistant with virtually no cable spring back. All TuffTest VNA cables provide low VSWR in addition to stable amplitude and phase performance up to 50,000 flexures.
Please follow this link for the TuffTestTM 18, 40, 50 and 67 GHz VNA Test Cables Data Sheet
San-tron's high performance 2.92mm Precision adapters are mode free and deliver low VSWR performance through 40 GHz. Adapters provide for gender conversions and inter-mating between different RF connector series. All San-tron Precision 2.92mm adapters are phase matched making them ideal for VNA and other test applications.
Please follow this link for the Precision 2.92mm Datasheet
San-tron's field replaceable 2.92mm connectors are mode free and deliver low VSWR performance through 40 GHz. The connectors are unique in that they provide equivalent electromagnetic performance, from DC to 40GHz, as similar products produced by Southwest Microwave.
Please follow this link for the Field Replaceable 2.92mm Datasheet
San-tron’s field replaceable SMA connectors are mode free and deliver low VSWR performance through 27 GHz. The connectors are unique in that they provide equivalent electromagnetic performance, from DC to 27 GHz, as similar products produced by Southwest Microwave.
Please follow this link for the Field Replaceable SMA Datasheet
San-tron Inc, announces the introduction of a new company logo and a new line of high performance, 2.92mm cable connectors.
“We are extremely excited to introduce our new company logo”, said Chris Sanders, Director of Sales and Marketing, San-tron. “Our updated logo embodies San-tron’s commitment to the development and introduction of coaxial interconnect products for today and tomorrow’s millimeter-wave electronics.”
San-tron (www.santron.com), a leading U.S. designer and manufacturer of RF/microwave coaxial connectors and cable assemblies, has recently introduced several new additions to their 4.3-10 series of RF/microwave adapters, and low PIM cable assemblies.
We’re pleased to announce we’ll be exhibiting in booth # 611 at the International Microwave Symposium (IMS), June 3rd to 6th, 2019 in Boston, MA.
San-tron will be discussing their latest innovations at European Microwave Week in London, UK October 3-7th in stand #67.
San-tron, Inc. will be discussing a new quick turn, custom cable assembly service at the International Microwave Symposium (IMS 2016) in San Francisco, CA May 23-26th in booth #1039. Advanced, custom-built assemblies will be built to spec to meet a variety of application requirements for premium signal performance and shock, vibration, and thermal conditions.
San-tron has attained their certification under the United States/Canada Joint Certification Program (JCP). This certification establishes San-tron’s eligibility to receive unclassified technical data disclosing critical technology governed by the U.S. Department of Defense Directive 5230.25 and the Canadian Technical Data Control Regulations (TDCR).
San-tron will be reviewing several new innovative connectors and assemblies at the International Microwave Symposium in Phoenix, AZ May 19-21st in booth # 3632. With a growing line of advanced, outdoor, low-PIM cable assemblies and new innovative pressurized solutions several environmental challenges related to coax can be overcome.
At this week’s European Microwave Show in Rome, San-tron in booth #233 will be displaying a growing line of pSeries pressurized connectors which provide low-loss and high-stability performance through 30 GHz at +/-65 psi. These pressurized connectors, which meet the IP68 standard, feature a simplified, three-piece design – body, center contact, and an innovative dielectric – which eliminates troublesome internal O-rings, gaskets, and silicone greases.
San-tron, Inc. has added high performance 4.1/9.5 mini-DIN connectors and adapters to their growing line of low-PIM SRX products. The mini-DINs feature RF performance through 16 GHz and yield low PIM of -160 dBc with VSWR < 1.10:1 up to 7 GHz. These new additions complement San-tron’s low-PIM SRX toolbox of solutions.
San-tron, Inc. has announced the release of their new, pSeries pressurized connectors which provide low-loss, high-stability performance through 30 GHz at +/-65 psi. These pressurized connectors, which meet the IP68 standard, feature a simplified, three-piece design – body, center contact, and an innovative dielectric – which eliminates troublesome internal O-rings, gaskets, and silicone greases.
San-tron announces a video describing the features of their high-performance eSMATM connector line. “An Introduction to eSMA Connectors and Cable Assemblies” is narrated by San-tron’s Director of Engineering, Fred Hull, and explains how San-tron’s design enhancements of a standard SMA interface can help cable assembly houses and other integrators overcome solder-joint shock and vibration fragility, and signal-transmission shortcomings in hand-formable cable assemblies through 20 GHz.
San-tron has announced the release of their new SRX™ low-PIM cable assemblies and coaxial adapters product line brochure.
San-tron is introducing a full line of low-PIM adapters within their SRX™ line. Available for 7/16 and Type N within-series applications and 7/16 between-series (Type N and SMA) applications, the new high-performance line of adapters complements San-tron’s SRX low-PIM cable assemblies.
San-tron has made design and manufacturing enhancements to its series of high-performance/low-PIM cable assemblies that improve both stability and repeatability.
San-tron describes engineering parameters, design and manufacturing challenges, and performance characteristics of the 40 GHz S292 series of 2.92 mm connectors and plugs in the video “An Introduction to San-tron S292 Connectors.”