In addition to a range of standard RF and microwave Type N coaxial connectors, San-tron offers a wide variety of N receptacles with panel, bulkhead, press-fit and threaded mountings. Panel mounts are available in 1/2, 11/16, and 1 inches square sizes, and with rectangular flanges. They may be gasket-sealed to a panel or not. This allows the user to interchange the connector series using the same panel layout. Many of our receptacles have extended dielectrics and feature solder-cup, post, tab, or threaded contact terminations. Some are pressurized. Plugs and jacks are available in crimp, clamp, or solder versions for a wide range of cables. Plugs are available with either standard-knurled or hexagon coupling nuts, with or without safety-wire holes. Female contacts may be heat-treated, beryllium-copper or phosphor-bronze when cost is a factor and are available in a variety of finishes including silver, gold, albaloy, or passivation in any combination.
Use our PRODUCT FINDER to find a Type N connector that is right for you.
To request a custom Type N connector solution visit our My Quote page.
TYPE N CONNECTOR PERFORMANCE | |
---|---|
Frequency Range: | DC to 11 GHz, DC to 18 GHz |
Voltage Rating: | 1000 VRMS (sea level) |
Nominal Impedance: | 50 ohms |
DWV: | 2500 VRMS min. at 60 Hz (sea level) |
Insulation Resistance: | 5000 megaohms min. |
Temperature Range: | -65°C to +165°C |
MATERIALS | |
Dielectrics: | PTFE Fluorocarbon |
Contacts (Female): | Beryllium copper, phosphor bronze |
Male Outer Contacts: | Phosphor bronze, brass |
Gaskets: | Silicone rubber, GR 50-60 |
Other Metal Parts: | Brass |
PLATING | |
Center Contacts: | Silver, gold |
Metal Parts: | Passivated, nickel, silver, albaloy |