|
|
|
LC Connectors
San-tron supplies reliable LC connectors for demanding, high-voltage applications from DC to
1 GHz. These weatherproof, 50-ohm connectors are intended for use with high-power 0.500 to 0.730 inches diameter
cables and are designed with dependable, screw-type, cable-clamping mechanisms, including armor clamps for
use with armored cables. Versions are available rated to 10,000 VRMS. The LC connectors are constructed
with extended PTFE dielectric material and nickel, silver, or albaloy-plated brass bodies. Beryllium-copper
male outer contacts and phosphor-bronze male outer contacts are plated with silver, gold,
or albaloy to minimize resistance and increase power-handling capability. All San-tron LC connectors will
mate with connectors and adapters that are equipped with MIL-STD-348 LC interfaces.
|
|
| PERFORMANCE |
| Frequency Range: |
DC to 1 GHz |
| Voltage Rating: |
5000 VRMS min. (sea level) |
| Nominal Impedance: |
50 ohms |
| DWV: |
5000 VRMS min. at 60 Hz (sea level) |
| Temperature Range: |
-65°C to +165°C
UG-154A/U to temperature rating of cable |
MATERIALS |
| Dielectrics: |
PTFE Fluorocarbon |
| Contacts (Female): |
Beryllium copper |
| Male Outer Contacts: |
Phosphor bronze |
| Gaskets: |
Buna-N, silicone rubber |
| Locking Ring: |
Phosphor bronze |
| Other Metal Parts: |
Brass |
PLATING |
| Center Contacts: |
Silver, gold |
| Metal Parts: |
Nickel, silver, albaloy |
|
