San-tron offers selected lines of C and SC RF and microwave coaxial connectors and adapters, usable for applications through 11 GHz. The 50-ohm C connector features a reliable quick-disconnect, bayonet-locking coupling mechanism, while the 50-ohm SC connector employs a threaded, screw-type coupling mechanism. Male and female cable assembly connector models are available in crimp and clamp versions for cables with diameters from 0.350 to 0.450 inches (versions are also available for armored cables and standard cables with diameters from 0.206 to 0.545 inches), while panel-mount and thread-mount receptacles are also available. They are constructed with brass bodies, heat-treated, beryllium-copper, female center contacts, phosphor-bronze male outer contacts, and PTFE dielectric or Fluoroloy® for high-power applications. Finish options include silver, nickel, albaloy, or gold, and gold-plated center contacts are also available. San-tron's C connector will mate with connectors and adapters that incorporate MIL-STD-348 C interfaces, while the SC connector will mate with connectors and adapters based on MIL-STD-348 SC interfaces. For custom solutions visit our My Quote page.
Use our PRODUCT FINDER to find a C or SC connector that is right for you.
To request a custom C or SC connector solution visit our My Quote page.
|C & SC CONNECTOR PERFORMANCE|
|Frequency Range:||DC to 11 GHz|
|Voltage Rating:||1000 VRMS min. (sea level)|
|Nominal Impedance:||50 ohms|
|DWV:||3000 VRMS min. at 60 Hz (sea level)|
|Insulation Resistance:||5000 megaohms min.|
|Temperature Range:||-65°C to +165°C|
|Dielectrics:||PTFE Fluorocarbon, Fluoraloy|
|Contacts (Female):||Beryllium copper|
|Male Outer Contacts:||Beryllium copper|
|Gaskets:||Silicone rubber, GR 50-60|
|Locking Ring:||Phosphor bronze|
|Spring Washers:||Beryllium copper|
|Crimp Sleeves:||DHP copper, CDA-122, soft temper|
|Other Metal Parts:||Brass|
|Center Contacts:||Silver, gold|
|Metal Parts:||Nickel, silver, albaloy|